Shotgun Microphones
For Pro Film, TV & Location Recording - Moisture-Resistant for Humid Conditions - No Switches, Buttons, or Dials - 40 Hz to 20 kHz Frequency Response - Hypercardioid at Low & Mid Frequencies - Lobar Pattern at High Frequencies - Low 13 dBA Self-Noise - High Sensitivity of -32 dB - Windscreen Reduces Wind Noise
Daily rental
EGP 800/day
Prices are shown per day. Final availability and rental details are confirmed with CCR.
CCR client registration is required before the first rental. Approval is handled by our team.
Achieve superb audio capture in demanding conditions for your next professional film, TV, or location recording with the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone. Mix-ready sound quality is provided by its sharp directivity, low noise, and strong output. Plus, there are no controls to worry about; the MKH 416-P48U3 delivers the reliability you need for high-pressure gigs. The microphone exhibits a hypercardioid polar pattern at low to midrange frequencies and transitions to a lobar pattern in high frequencies, allowing it to attenuate 125 Hz to 2 kHz by approximately 10 dB at the 90° off-axis points. Your dialogue, foley, and sound effects can be recorded with full dynamics and clarity, thanks to the MKH 416-P48U3's wide frequency response, enhanced consonant articulation, and high SPL handling. Performs in Adverse Environmental Conditions When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail. The MKH 416-P48U3's RF condenser design makes it highly immune to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions. Professional Sound Quality The MKH 416-P48U3 was engineered with the experienced professional in mind. Its 40 Hz to 20 kHz frequency response incorporates a gentle rise from 5 to 15 kHz to increase intelligibility, and a natural bass roll-off to mitigate rumble. Its low self-noise of 13 dBA and high sensitivity of -32 dB enable studio-worthy signal purity without requiring noise reduction and gain boosting in postproduction. Phantom Powered The MKH 416-P48U3 boasts a transformerless and fully floating balanced output for optimal signal integrity.
Included in the rental
Form Factor
Stand/Boom Mount
Element Type
Condenser
Polar Pattern
Supercardioid / Lobar
On-Board Controls
No
Frequency Range
40 Hz to 20 kHz
Maximum SPL
130 dB SPL
Analog Output
1x XLR 3-Pin
Power Sources
Phantom Power
Primary Applications
Audio for Video, Location Sound, Field Recording
Form Factor
Stand/Boom Mount
Intended Sound Sources
Vocals, Room Ambiance
Sound Field
Mono
Element Type
Condenser
Polar Pattern
Supercardioid / Lobar
Orientation
End Address
Circuitry
Tube
Pad
No
High-Pass Filter
No
Gain Adjustment
No
On-Board Controls
No
Frequency Range
40 Hz to 20 kHz
Maximum SPL
130 dB SPL
Off-Axis Rejection
3 dB at 60°; 20 dB at 120°; 15 dB at 180°
Impedance
25 Ohms
Load Impedance
800 Ohms
Sensitivity
-32 dBV/Pa at 1 kHz
Equivalent Noise Level
13 dB A-Weighted; 24 dB CCIR
Analog Output
1x XLR 3-Pin
Power Sources
Phantom Power
Operating Voltage
48 V
Color
Black
Mounting Thread Size
5/8"-27 Female
Construction Material
Metal
Environmental Protection
No
Dimensions
ø: 0.75 x L: 9.84" / ø: 19 x L: 249.94 mm
Weight
6.17 oz / 175 g (Microphone)
| Form Factor | Stand/Boom Mount |
|---|---|
| Element Type | Condenser |
| Polar Pattern | Supercardioid / Lobar |
| On-Board Controls | No |
| Frequency Range | 40 Hz to 20 kHz |
| Maximum SPL | 130 dB SPL |
| Analog Output | 1x XLR 3-Pin |
| Power Sources | Phantom Power |
| Primary Applications | Audio for Video, Location Sound, Field Recording |
| Form Factor | Stand/Boom Mount |
| Intended Sound Sources | Vocals, Room Ambiance |
| Sound Field | Mono |
| Element Type | Condenser |
| Polar Pattern | Supercardioid / Lobar |
| Orientation | End Address |
| Circuitry | Tube |
| Pad | No |
| High-Pass Filter | No |
| Gain Adjustment | No |
| On-Board Controls | No |
| Frequency Range | 40 Hz to 20 kHz |
| Maximum SPL | 130 dB SPL |
| Off-Axis Rejection | 3 dB at 60°; 20 dB at 120°; 15 dB at 180° |
| Impedance | 25 Ohms |
| Load Impedance | 800 Ohms |
| Sensitivity | -32 dBV/Pa at 1 kHz |
| Equivalent Noise Level | 13 dB A-Weighted; 24 dB CCIR |
| Analog Output | 1x XLR 3-Pin |
| Power Sources | Phantom Power |
| Operating Voltage | 48 V |
| Color | Black |
| Mounting Thread Size | 5/8"-27 Female |
| Construction Material | Metal |
| Environmental Protection | No |
| Dimensions | ø: 0.75 x L: 9.84" / ø: 19 x L: 249.94 mm |
| Weight | 6.17 oz / 175 g (Microphone) |
Rental notes
01
Add equipment
Build one request list for the full production kit.
02
Generate the PDF
Review quantities and rental days in one document.
03
Share on WhatsApp
CCR confirms availability, documents and pickup.