Shotgun Microphones
For Indie Films, TV & Documentaries - Convenient Digital Switching - Phantom Powered - Switchable Treble Boost and -10 dB Pad - Selectable 75 Hz Low-Cut Filter - Low-Noise Circuitry - High Sensitivity and High Max SPL - Warm and Natural Tone - Windscreen Reduces Wind Noise - Lightweight Metal Housing
Daily rental
EGP 350/day
Prices are shown per day. Final availability and rental details are confirmed with CCR.
CCR client registration is required before the first rental. Approval is handled by our team.
Customize your tone and capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG4 phantom-powered shotgun microphone. Specialized features such as low-noise circuitry, digitally switchable pad and frequency settings, and minimal handling noise reduce the need to repair and restore audio in post production. The NTG4's elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG4 delivers warm sound due in part to its gentle dip in high frequencies and its rumble-reducing selectable low-cut filter. A switchable treble boost is on hand for situations where additional clarity is needed. Quality Sound Capture The combination of the NTG4's 8.9" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones. Phantom Powered Thanks to its 3-pin XLR output and compliance with 12, 24, or 48 VDC phantom power, the NTG4 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras. Customizable Tone via Digital Switching Digital switching not only allows for intuitive access to the NTG4's settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic. Use the +6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise).
Included in the rental
Form Factor
Stand/Boom Mount
Element Type
Condenser
Polar Pattern
Supercardioid
On-Board Controls
High-Pass Filter, HF, Pad
Frequency Range
20 Hz to 20 kHz
Maximum SPL
135 dB SPL
Analog Output
1x XLR 3-Pin
Power Sources
Phantom Power
Form Factor
Stand/Boom Mount
Sound Field
Mono
Element Type
Condenser
Diaphragm
0.5" / 12.70 mm
Polar Pattern
Supercardioid
Orientation
End Address
Circuitry
Solid-State
Pad
-10 dB
High-Pass Filter
75 Hz
Tone Adjustment
High Boost:; +6 dB
On-Board Controls
High-Pass Filter, HF, Pad
Frequency Range
20 Hz to 20 kHz
Maximum SPL
135 dB SPL
Off-Axis Rejection
5 dB at 60°; 24 dB at 120°; 18 dB at 180°
Impedance
200 Ohms
Sensitivity
-32 dBV/Pa at 1 kHz
Dynamic Range
119 dB
Signal-to-Noise Ratio
78 dB
Equivalent Noise Level
16 dB A-Weighted
Analog Output
1x XLR 3-Pin
Power Sources
Phantom Power
Operating Voltage
12 to 48 V
Color
Black
Mounting Thread Size
5/8"-27 Female (3/8"-16 Female with Included Adapter)
Construction Material
Metal
Dimensions
ø: 0.87 x L: 8.86" / ø: 22 x L: 225 mm
Weight
4.44 oz / 126 g (Microphone)
| Form Factor | Stand/Boom Mount |
|---|---|
| Element Type | Condenser |
| Polar Pattern | Supercardioid |
| On-Board Controls | High-Pass Filter, HF, Pad |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 135 dB SPL |
| Analog Output | 1x XLR 3-Pin |
| Power Sources | Phantom Power |
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Element Type | Condenser |
| Diaphragm | 0.5" / 12.70 mm |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | -10 dB |
| High-Pass Filter | 75 Hz |
| Tone Adjustment | High Boost:; +6 dB |
| On-Board Controls | High-Pass Filter, HF, Pad |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 135 dB SPL |
| Off-Axis Rejection | 5 dB at 60°; 24 dB at 120°; 18 dB at 180° |
| Impedance | 200 Ohms |
| Sensitivity | -32 dBV/Pa at 1 kHz |
| Dynamic Range | 119 dB |
| Signal-to-Noise Ratio | 78 dB |
| Equivalent Noise Level | 16 dB A-Weighted |
| Analog Output | 1x XLR 3-Pin |
| Power Sources | Phantom Power |
| Operating Voltage | 12 to 48 V |
| Color | Black |
| Mounting Thread Size | 5/8"-27 Female (3/8"-16 Female with Included Adapter) |
| Construction Material | Metal |
| Dimensions | ø: 0.87 x L: 8.86" / ø: 22 x L: 225 mm |
| Weight | 4.44 oz / 126 g (Microphone) |
Rental notes
01
Add equipment
Build one request list for the full production kit.
02
Generate the PDF
Review quantities and rental days in one document.
03
Share on WhatsApp
CCR confirms availability, documents and pickup.